الوصف
Thermal Packs-كمادات رملية
Are Fabricated Of 100% Cotton Canvas And Sewn With Heavy Duty Nylon Thread. The Packs, Used With Heating Unit, Can Provide As Much As 30 Minutes Of Deep Moist Heat Therapy
size
l,m,s,xl
SKU: N/A
Categories: Physiotherapy, Thermotherapy
Brand: Whitehall
Specifications
Are Fabricated Of 100% Cotton Canvas And Sewn With Heavy Duty Nylon Thread. The Packs, Used With Heating Unit, Can Provide As Much As 30 Minutes Of Deep Moist Heat Therapy. Each Of The Packs Have Color Coded Tabs For Quick Identification And Easy Removal From The Heating Unit.
Thermal Packs Are Available In A Variety Of Sizes. They Will Give Up To Thirty Minutes Of Moist Heat Therapy And Are Fully Reusable. Thermal Packs Are Easy To Heat And Apply, Using Either Standard Terry Cloth Towels Or Thermal Pack Covers.
Sizes:
Standard Size 10″ X 12″ (25cm X 30cm) The Most Versatile Thermal Pack Size
Oversize 15″ X 24″ (37cm X 60cm) Allows Treatment Of Larger Areas
Cervical Size 24″ Long (60cm) Easily Conforms To The Neck Area
Myofacial Size 23″ Long (58cm) Easily Conforms For Treatment Of Neck And Face
Half Size 5″ X 12″ (12cm X 30cm)
Spinal Size 10″ X 18″ (25cm X 45cm)
Spinal Size 10″ X 24″ (25cm X 60cm)
Knee-Shoulder Size 10″ X 20″ (25cm X 50cm) Center Cutout Lets Pack Conform To Joints
Cervi-Back Size 24″ X 23″ (61cm X 58cm) Easily Conforms For Treatment Of Back And Neck.
To PRE-SOAK The Thermal Pack
Before The First Use, You Must Condition Each New Thermal Pack. This Is Necessary Only BEFORE The First Use. You Can Reuse The Pack After About Fifteen Minutes Of Reheating.
Take The Thermal Pack By The Corner Loops – White And Blue – So The Sections Are Horizontal.
Gently Shake The Pack Back And Forth To Evenly Distribute The Filler Material.
Put The Thermal Pack In A Large Enamel, Stainless Steel Or Plastic Container. DO NOT Use An Aluminum Container. You Can Use The Heating Unit For Conditioning The Thermal Packs.
Fill The Container With Enough Tap Water To Cover The Packs.
Soak The Packs For One Hour Minimum.
The Thermal Packs Are Now Ready For Heating.
To HEAT The Thermal Pack
Using The Stove To Heat The Thermal Pack:
Put The Thermal Pack In A Large Pan (Enameled Or Stainless Steel) And Fill With Enough Water To Fully Cover The Pack.
Put The Pan On The Stove And Heat.
After The Water Starts To Boil, Lower The Heat To The Low Setting. Keep The Water Temperature BELOW 160°F (70°C) To The Low Setting.
Replace The Water As Needed. CAUTION: The Thermal Pack Could Be Burned If The Heat Is On High.
Wash The Pan After Heating Your Thermal Pack.
Using The Microwave To Heat The Thermal Pack:
Put The Thermal Pack In A Shallow Microwave-Safe Dish And Cover With Water.
Heat In The Microwave For 15-20 Minutes.
CAUTION: Follow The Microwave Oven Manufacturer’s Instructions For Thawing And Heating.
To Reheat, Allow 5-10 Minutes. Wash The Pan After Heating Your Thermal Pack.
Using The Heating Unit To Heat The Thermal Pack:
Follow The Steps In The Heating Unit Operating Instructions Booklet.
To APPLY The Thermal Pack
Use Either Either Ordinary Towels Or Thermal Pack Covers.
When Using Towels, Wrap The Thermal Pack In A Minimum Of 5-6 Layers Of Towels.
Put The Wrapped Thermal Pack On The Area To Be Treated.
To Vary Heat Intensity, Increase Or Decrease The Number Of Towels.
CAUTION: Always Apply The Thermal Pack To The Patient.
Never Have The Patient Lie On The Thermal Pack. DO NOT
Apply Over Insensitive Skin Or On Areas Of Poor Circulation.
Use Extra Care And Judgement When Using With Infants Or The
Elderly.
To CARE For The Thermal Pack
For Regular Use, Keep Your Thermal Pack Constantly Heated In Water On The Stove, Microwave Or In Your Heating Unit. It Will Always Be Ready For Use.
For Storage, Put The Thermal Pack In A Sealed Plastic Bag In The Freezer. This Keeps The Pack Clean And Prevents It From Drying Out. Drying Out Doesn’t Hurt The Thermal Pack; Its Filler Will Become Hard And Caked And Will Require A Much Longer Reheating Time.